Apex Water Restoration
Repair and Restoration
Apex Water Restoration knows the importance of not just removing the water damaged areas, but they must also be repaired and restored.
24/7 Local Services
Quick Service
No-Obligation Quotes
BEST WATER DAMAGE RESTORATION IN TEXAS – IT’S WATER RESTARTION AS IT SHOULD BE!
Apex Water REstoration
Importance of Repair and Restoration
Restoration of the property after water damage is an important service that should be familiar to any property owner or manager. If water can spread unchecked, it can cause damages worth thousands of dollars. Because of this, you must take preventative measures and seek assistance with water removal as soon as possible.
Damage to your property caused by water can result in many problems besides physical ones. In your home or commercial building, water has the potential to rust metal, rot wood, and rust appliances, among other materials. The damage caused by water should be repaired as soon as possible because it can potentially draw in additional pests, such as termites or mold, which will only worsen the situation.
Restoration services for water damage include mitigation, which entails extracting the water using air movers and dehumidifiers, drying out carpets and furniture if necessary, stripping away any damaged materials to avoid additional deterioration, and taking measures to prevent mold or mildew growth, which will grow on wet surfaces if nothing is done to prevent it.
Read More
The presence of water encourages the growth of mold and mildew, which can result in respiratory problems.
Water damage restoration is a serious problem resulting in potential health hazards and expensive repair bills. The presence of water encourages the growth of mold and mildew, which can result in respiratory issues and other complications, such as allergic reactions. Calling Apex Water Restoration in Friendswood, Texas, as soon as possible is something you should do if water has been standing in your home for more than 24 hours.
The experts at Apex Water Restoration in Friendswood, Texas, will work closely with you throughout the entirety of the process of drying out wet carpets and walls, thoroughly sanitizing surfaces, removing any standing water (including carpeting) from your property, dehumidifying the air with an industrial-sized dryer system created especially for this purpose, and repairing any damaged woodwork, drywall, or plaster. They will work with you to dry wet carpets and walls and thoroughly sanitize surfaces.
Fast service is something that Apex Water Restoration in Friendswood, Texas, is proud to offer its customers around the clock. Apex Water Restoration is the solution to your problem; the professionals at Apex Water Restoration in Friendswood, Texas, can assist you in restoring your home to its condition before the damage occurs.
Because water can penetrate the walls, it can potentially cause long-term structural damage.
Water damage is a problem that various reasons can cause; however, the presence of pipes underneath your home is one reason for water seeping into your home. Water can leak from these pipes and enter the building through cracks in the walls or the flooring.
It can result in long-term structural damage, such as mold growth on the drywall and the loss of insulation in the ceilings. Apex Water Restoration is a company that specializes in delivering quick response times (typically within an hour) with trained professionals who are experts at repairing any water overflow problem that you might have.
We make it easy for you to call us whenever you require immediate assistance by maintaining our emergency services around the clock so that you can do so at any time of day or night. Water damage can leave unsightly stains on ceilings and walls, but when you work with Apex Water Restoration, you’ll see that we never skimp on quality when providing service to your home or business. We will immediately restore your property using only the highest-quality cleaning supplies and machinery.
Finding a skilled professional experienced in restoring water-damaged properties is essential to repairing and restoring water damage. Damage caused by water can be difficult to deal with, particularly when restoring your property to the splendor it once possessed.
Mold is toxic, and exposure to it can make a person sick.
Mold is a potentially disastrous problem for property and business owners alike. Removing mold from residential and commercial buildings is important in restoring water damage. Mold will most likely grow in dark, damp, and humid places with inadequate or nonexistent ventilation, such as cellars, crawl spaces, kitchens, bathrooms, and laundry rooms.
It must be eliminated as soon as possible because prolonged exposure will make people sick and may result in severe damage to the structure. Mold can be removed during the restoration and repair process for water damage, and further growth can be stopped by drying out the affected areas. Cleaning with anti-microbial products, applying fungicides to prevent new mold growth, and disinfecting all hard surfaces are all part of this process.
Restoration and repair of water damage are essential components of the day-to-day operations of a company. It is because it helps to maintain a healthy environment for both the customers and the employees of the company, in addition to ensuring the safety of both groups.
Sewage backups are extremely common when dealing with water damage restoration and repair.
Repairing and restoring water damage is a laborious process that can be challenging to organize and organize effectively. Water leaks and sewage backups are two of the most common causes of water-related problems, but they are not the only causes. Other water-related issues can also arise.
Water infiltration into your home or business can be caused by various issues, from burst pipes to malfunctioning dishwashers. It is essential to put together a contingency plan well before any potential catastrophe to protect oneself from the problems that could arise. Having a plan before restoring your property to the greatest extent possible.
Storms can frequently bring flooding, which can destroy homes.
Water can cause extensive and costly damage to any property. This repair work requires several steps before it can be considered complete. Flooding caused by storms such as hurricanes and tropical systems, as well as extreme rainfalls such as thunderstorms and torrential downpours, can both contribute to the formation of water intrusion in a building.
Damages caused by water include rotting wood floors, discoloration on ceilings, mold growth, plumbing clogs, electrical shorts in walls and appliances, structural issues with sagging beams and posts, plaster cracks in ceiling joints (especially around windows), and warped doors and windows as a result of swelling caused by excess moisture. Water can also cause electrical shorts in walls and appliances. Depending on the situation’s specifics, repairing water damage may involve several procedures.
The removal of all standing water from carpets, floors, furniture, walls, and other surfaces requires a high-powered vacuum, which is the tool that will be used in the first step of the water damage restoration process, which is known as water extraction. After the flooding has been stopped, water extraction starts as quickly as it can as soon as possible. It is essential to dry anything that has become wet to prevent the growth of mold or mildew, which is why water removal and extraction go hand in hand.
The cost of repairing a home damaged by flooding is extremely high.
Because water damage and flooding can cause irreparable harm to your home’s structure irreparably, you should contact a company specializing in water damage restoration as soon as possible. We provide emergency services that can help prevent further water damage from occurring and restore any property to the state it was in before the loss occurred.
Apex Water Restoration is one company in the Friendswood, Texas area that provides these types of services in addition to the removal of mold or mildew, the removal of debris left behind by floodwaters, the protection against future damages through the thorough drying out processes, the performance of structural repairs for homes that have been damaged by natural disasters such as storms and fires, the mitigation of biohazards caused by sewage backups, and even the repair of electrical wiring.
Businesses can also benefit from restoring their water damage, so they are ready to operate as soon as the floodwaters recede.
BEST WATER DAMAGE RESTORATION IN TEXAS – IT’S WATER RESTARTION AS IT SHOULD BE!
Apex Water Restoration
Types of Repair and Restoration Services
Many different materials found in homes are susceptible to deterioration and damage if a water damage, including storm damage, occurs. The size of the damaged area can also affect the type of response that is necessary and the process used to restore water damage.
Wood or products that give the appearance of the wood are used in constructing most single-family homes and low-rise residential buildings. In contrast, steel and concrete are typically used to construct commercial and industrial buildings. Because of the vastly different restoration approaches required for these different materials and environments, most businesses focus their efforts on specializing in a single field.
Types of water damage repair and restoration services may include the following:
Water Removal
The first step in repairing water damage is ensuring that any domestic water sources contributing to the damaged area have been turned off. If the source of the water is a burst pipe or a leaking storm or sanitary pipe, the pipe will be repaired.
The water damage restoration company will remove any standing water as quickly as possible using either pumps or vacuums as soon as the source of the water leak has been stopped:
- Pumps are capable of quickly removing significant volumes of water.
- Vacuums are capable of removing only trace amounts of water.
If you use a vacuum to pick up water, you will need a special vacuum. In most cases, shop-style vacuums can be utilized for this task, whereas central vacuum systems installed in residential properties cannot.
Water Damage Clean-Up
After the standing water has been removed from the area, the space needs to remove any excess moisture from the building materials and the air. If the damage caused by water is severe enough, structural drying will need to be carried out.
The technicians must remove any materials, such as flooring or drywall, saturated with water to expose the structural materials to the air. After that, they use various drying equipment like fans and dehumidifiers.
Purification of White Water
The next step is for them to conduct moisture tests within the rooms to ensure that the moisture levels are below what is considered safe for the building materials as well as the health of the occupants. If the water damage was caused by potable or white water (the type of water that comes out of your taps), a disinfecting cleaning product is typically used to perform a light cleaning after the damage has been assessed.
Purification of Grey and Black Water
If the water damage was caused by a stormwater leak or a burst or leak in a sanitary pipe (also known as grey and black water), then a more extensive clean-up will be required to prevent the growth of bacteria and mildew in the area. It is because grey and black water contains higher levels of bacteria.
Water Repair
The drying process that eliminates excess moisture from the air and building materials must be finished before the restoration process can begin. Technicians must remove standing water before this step can be taken.
As a result of the damage that water can inflict, it is frequently necessary to replace the flooring, carpeting, and upholstery. To prevent mold growth in the future, it is typically necessary to dispose of a significant amount of building materials, including laminated flooring and drywall. If water enters the structure through the ceiling or the roof, any soft materials damaged by the water must be replaced.
Even though most home appliances are reasonably water-resistant, if the damage is severe enough, such as when electrical components become submerged in water, the appliance must be dried out, repaired by an experienced professional, or replaced entirely.
In many cases, restoration specialists will be able to determine whether or not particular materials or appliances can be saved or whether or not they need to be replaced. Suppose the damage is beyond the scope of the restoration expert’s work. In that case, they will recommend that you seek the advice of a general contractor specializing in the construction work needed.
Mold Removal and Treatment*
Mold is a mold that can only thrive in conditions with elevated humidity or plenty of standing water.
Mold has been linked to a wide variety of adverse health effects, including the following:
- Allergy-like symptoms
- Eyes and skin that itches
- Headaches
Mold exposure may also worsen asthma symptoms in people with the condition. In more severe instances, mold exposure can result in bleeding in the lungs (pulmonary hemorrhage) (bleeding of the lungs).
The relative humidity in an indoor space must be maintained at a level lower than 60% if there is no mold growth risk. The ideal range for the relative humidity is between 30 and 50 percent.
It is common practice to use dehumidifiers to bring the relative humidity of space down; however, before dehumidification can be effective, it is necessary to eliminate any sources of standing water or leaks in the water supply.
Mold must be removed not only for reasons relating to public health but also to ensure that building materials will last as long as possible. Mold has the propensity to trap moisture close to the surface of materials, which allows water to penetrate the material and causes further damage over time.
*Please not that Apex Water Restoration does not offer mold remediation services at this time.
Water Damage Prevention
Always ensuring water stays where it’s supposed to be can be the first step in preventing water damage. Only trained professionals should install appliances and conduct appropriate plumbing practices
Washing machines and water heaters require proper maintenance and prompt replacement when they end their useful life because they consume a significant amount of water.
Water can seep into basements that have not been properly constructed with footing drains if building foundations are not correctly laid out. If this occurs, installing a sump pump is frequently a more cost-effective alternative to reconstructing the building foundation.
Sump pumps allow water to gather at a lower point, then pump it to a higher location, where it can be drained out of the building along with the rest of its sanitary waste.
Storm Damage Services
Emergencies caused by storm damage can result in water entering a building if there is a leak somewhere. It is especially obvious in situations where strong winds cause damage to a roof, which then allows water to enter the structure and seep into the ceilings.
When repairing water damage brought on by storms, the primary focus should be on repairing not only the section of the building that was affected by water damage but also the damage brought on by the storm that made it possible for the damage to occur in the first place.
In addition to water clean-up, storm repair services may include boarding up windows, covering damaged areas with tarps, and repairing damaged structures.
BEST WATER DAMAGE RESTORATION IN TEXAS – IT’S WATER RESTARTION AS IT SHOULD BE!
Apex Water Restoration
Repair and Restoration Process
Damage caused by water can be a significant source of stress. If not dealt with appropriately, it causes significant property damage and risks people’s health.
1. Assessment
Restoring water damage begins with an inspection, which is the first step. At this point, a trained expert will visit your residence or place of business to evaluate the damage level.
They will also determine the type of water damage that has been done to your property. It is extremely important because different types of water damage require unique approaches to restoration.
The following are examples of water damage:
Clean water is water that does not come from a contaminated source, such as a pipe that has been broken or a faucet that leaks. It does not threaten one’s health and can be cleaned up in a reasonable amount of time.
Gray Water is water that still contains contaminants, such as water used for washing dishes or clothes. Because of the potential adverse effects on one’s health, the area must be thoroughly cleaned up.
Black Water is the most dangerous kind of water damage, and it can be caused by sewage or floodwater. It is the most common type of water damage. It can contain pathogenic bacteria and other contaminants hazardous to one’s health.
2. Water Removal
After the evaluation, the next step is to drain the water from the area. Pumps and vacuums built for commercial use are utilized to achieve this result. In addition, the team will remove any drenched carpeting, furniture, or other items located within the affected area.
Mold can begin to grow in the water if allowed to sit for an excessive amount of time. Because mold can result in serious health problems, they need to get rid of the water as quickly as possible.
It may be the only thing needed to fix the problem in some instances. In other circumstances, on the other hand, this might only be the first step in a lengthy process.
3. Dehumidification
Restoring water damage involves three steps, the third of which is dehumidification. It is extremely important because it helps to inhibit the growth of mold.
A type of fungus known as mold favors moist environments to grow and spread. In most cases, it takes the form of spores, which are too small to be seen with the naked eye. These spores can grow rapidly and reproduce once they come into contact with water.
Dehumidification is the removing moisture from the air through the utilization of specialized machinery. It contributes to the creation of an environment that is not favorable to the growth of mold.
The dehumidification process can be time-consuming, and for it to be successful, it may have to be carried out over several days or weeks.
4. Cleaning and Disinfecting
Apex Water Restoration will begin cleaning and disinfecting once the area has reached its desired dryness level. This process helps to get rid of any contaminants that might be there.
Depending on the nature of the water damage, several different approaches can be taken to clean and disinfect the affected area.
For instance, if you have damage caused by black water, the team will need to use specialized cleaners and disinfectants to eliminate the bacteria and any other contaminants.
If you have damage caused by gray water, they may only use standard cleaning products. In any case, the location in question requires expert cleaning to guarantee that all contaminants will be eliminated.
The region will need to be dried once more after it has been cleaned and disinfected. It helps to prevent further damage and mold growth from occurring.
5. Water Damage Restoration or Repair
The final step in restoring water damage is the repair or restoration of the damaged area. Any structural damage the team may have caused will be repaired in this location.
The specific processes that take place during this stage can vary, but they typically include the following:
When repairing or replacing damaged drywall, the damaged section of the drywall will need to be removed, and a new piece of drywall will need to be installed.
Repairing or replacing flooring may involve tearing up the carpet, tiling, or even the hardwood floors and installing new ones.
Restoring or repairing furniture is something that a trained and experienced upholstery cleaner can do for you.
In some instances, the damage may be of such a severe nature that it cannot be repaired. In such circumstances, the team will collaborate with you to assist you in determining what steps to take next. A staff member may suggest replacing certain items or even completely rebuilding your home or place of business.
No matter what happens, the professionals at Apex Water Restoration will be there for you every step to ensure you can resume your life as quickly as possible.
WHY CHOOSE US?
Experience and Expertise
You want to work with a water restoration company that knows what they’re doing. You’ve come to the right place. Apex Water Restoration has the skills and expertise to ensure your property is safe. Our experience is what sets us apart and we do the job right the first time.
High-Quality Equipment
The process of water removal from a home or business requires the use of special equipment. As you can imagine, not all equipment is created equal. At Apex Water Restoration, we ensure the equipment we use is top notch and highly rated.
Customer Service
We know that communication and great customer service is the thing that sets any business apart. Our professionals are dedicated to giving you the best customer service experience you can get. We know you have options, and we treat every customer as part of our family.
Competitive Pricing
Getting the price right is important. In fact, pricing our jobs fairly and competitively is something we work hard to get right. We work with your insurance and make sure that we can get your water problem resolved quickly, and fairly.
More Repair and Restoration Information
Apex Water Restoration is well informed about what needs to be done when water intrusion occurs. However, we know you may have some questions. Below are great resources to help answer any of your repair and restoration questions.
Water Damage Repair
The process of repairing and restoring water damage to a home is known as water damage restoration. The goal of water damage restoration is to return the home to the condition it was in before the occurrence of the water damage.
Storm Damage Restoration
After a storm, it’s important to analyze the extent of the damage to your home. Our technicians can help give you an accurate assessment of the damage.
Water Damage Insurance Claims
Apex Water Restoration cna help in the process of getting insurance claims processed. Let us do the heavy lifting on this frustrating piece of the puzzle.
Water Damage Cleanup
As you can imagine, the cleanup of water damage can be extensive. Many times you need help getting this part taken care of. Trust the professionals at Apex Water Restoration to make this easier.
24-Hour Emergency Water Damage Services
An initial phone call initiates the process of cleanup and restoration. You must take prompt action if water damage has occurred. Even a delay of a few hours can significantly exacerbate the damage that has been done.
What They Say
Customer Testimonials
Busted pipes are the worst! We had ours bust from the freeze and had a lot of damage. Thanks to Apex Water Restoration for taking care of our problem quickly!
Best company for water damage. They got to us the same day and began drying out our home. It could've been worse, but with their quick response, thankfully it wasn't.
Panic ensued when we found the leak in our shower. Unfortunately the damage had already been done. Apex came out and did the demo and got our space dried out so we could get it repaired. Thanks!
Friendswood, TX
Water Damage Restoration Done Right
Take advantage of our free quotes over the phone and No Call Out Fee on all jobs!
Repair and Restoration FAQ’s
Find the Answers to Your Water Damage Assessment Questions Here
A water restoration professional can answer any and all questions you may have regarding issues related to water damage restoration. Below are some commonly asked questions.
Apex Water Restoration technicians can provide the answers you need. Call us whenever you need any water damage services in Texas!
What types of repairs are typically needed after water damage?
- Water-damaged drywall and other structural elements must be removed.
- Removing and disposing of floor covering
- Subfloor replacement or restoration
- Mold growth removal and encapsulation (mold remediation)
- Window and door repair or replacement
- Repairing a damaged roof
- Moisture testing to ensure that the property and all of its elements are completely dry
How long does the repair and restoration take?
On average, it takes 72 hours for one room to dry and be ready for reconstruction, followed by 1 to 2 weeks for actual water damage repairs. Water damage restoration usually consists of two stages. The first step is to dry and clean the structure.
Can you provide an estimate for the cost of repairs?
Water damage restoration is the process that professionals use to clean up water after a disaster. It ranges in price from $1,304 to $5,698, with an average of $3,445. This range varies according to the intensity of the damage, the type/class of water damage and repair, and the location of the damage.
Mold remediation and preventive care are additional cost factors, though insurance plans for qualifying homeowners offset some costs. Water damage should always be documented for insurance claims.
What happens to damaged materials during the restoration process?
The water damage restoration company will remove water-damaged materials. If there are any water-soaked carpets, they must be removed. If the water soaks through the walls and ceilings, they may also have to remove water-damaged drywall or ceiling material.
Can all water-damaged materials be restored?
Several factors influence the decision to restore water-damaged materials. Some of the factors influencing the decision are as follows:
Water Damage Type: While some water exposure is acceptable, such as clean water from a water supply line, others are not.
Items with upholstered fabrics, wood, and drywall can be recovered from clean water damage if they are recovered quickly.
Saturation Time: The time items remain in water determines whether they are restored or discarded.
Replacement Costs: The difference between the cost of replacing an item and the cost of restoring it.
It is critical to note that a professional restoration service provider should handle the restoration process because many techniques must be used for success.
How do you handle electrical systems and appliances during the repair process?
Here are some guidelines to follow:
- Cut off the power to the affected area.
- Do not touch any electrical equipment standing in water or on a wet surface.
- Turn off any electrical equipment that has been submerged in water.
- Do not attempt to repair or inspect any water-damaged electrical equipment.
- Contact a qualified electrician to inspect and repair any water-damaged electrical equipment.
Even if thoroughly dried, water-damaged electrical equipment poses a serious long-term safety and fire risk if not correctly and fully restored.
What happens if mold is discovered during the restoration process?
If mold is discovered during restoration, mold remediation workers will be fully outfitted, including head-to-toe white suits, booties, respirators, and goggles. They spray the affected area with paint or whitewash, covering or encapsulating the remaining mold spores. To ensure that no more mold grows, the mold remediation company should spray well beyond the moldy area.
For example, even if only a small portion of an attic has mold, the company will most likely spray the entire attic. Any sources of water or moisture must be addressed before mold remediation can begin. Otherwise, the mold could reappear.
Can you help me with my insurance claim after water damage?
Yes. Apex Water Restoration has a very accommodating staff if you have questions about water damage claims, call (832) 990-8022.
What type of documentation is provided during the repair and restoration process?
Water damage restoration professionals can use a convenient inspection tool to document what is happening on-site. They can take photos of water damage inspections and attach them to detailed reports for clients and insurance providers. It eliminates the need to print photos, staple them to paper, and mail them to the insurance company.
Apex Water Restoration has the knowledge and equipment to restore your property to its pre-water damage state quickly. They take a scientific approach to water removal and cleanup, emphasizing monitoring and documenting the drying process from start to finish. Every water damage event requires a unique solution, but the general procedure remains the same.
Will my property look the same after the repair and restoration process is complete?
Yes. It is important to note that the restoration process is about fixing the damage and restoring the property to its pre-damage condition. Apex Water Restoration is an expert in water damage repair and restoration. You can be sure your house will look how it was before the water damage.
Inquire NOW
100% no-obligation quote